BDLCN - LARD OIL, C-O-376A

Export as PDF
  • MSDS: BDLCN
  • Manufacturer: OCTAGON PROCESS INC
  • Product Name: LARD OIL, C-O-376A
  • National Stock Number: 9150-00-231-6699
Product Identification

Product ID:LARD OIL, C-O-376A
MSDS Date:01/01/1987
FSC:9150
NIIN:00-231-6699
MSDS Number: BDLCN

Responsible Party
OCTAGON PROCESS INC.

Emergency Phone: 201-945-9400

Cage: 82925

Contractor
OCTAGON PROCESS INC.
EDGEWATER, NJ 07020 US

Telephone: 201-945-9400

Cage: 82925

Ingredients

TRIGLYCERIDES


FATS

Hazards

Effects of Overexposure:IF PRODUCT IS OVERHEATED,WILL PRODUCE ACROLEIN
WHICH CAUSES TEMPORARY BURNING OF EYES.

First Aid

First Aid:INH:REMOVE TO FRESH AIR;EYE:FLUSH WITH WATER FOR AT LEAST 15
MIN.GET MEDICAL AID IF IRRITATION PERSISTS;SKIN:WHEN PRODUCT IS
MOLTEN OR HEATED WILL CAUSE OIL-TYPE BURNS.TREAT AS SUCH;ING:GET
MED ATTN.

Fire Fighting

Flash Point:500F/260C(COC)
Extinguishing Media:CO*2,SAND,SODIUM BICARBONATE.
Fire Fighting Procedures:USE NO WATER,TREAT AS AN OIL FIRE.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:REMOVE FREE LIQ.,LARGE SPILLS CAN BE VACUUMED
UP.

Handling

Handling and Storage Precautions:STORE AT TEMPERATURES AT MINIMUM OF
10-20C.

Exposure Controls

Respiratory Protection:NONE
Ventilation:MECHANICAL.
Protective Gloves:NONE
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:THERMAL PROTECTION IF HEATED.
Supplemental Safety and Health
MSDS DATED 4-10-87.

Chemical Properties

HCC:V6
Spec Gravity:0.91
Evaporation Rate & Reference:<1,WATER=1.
Appearance and Odor:WHITE TO YELLOWISH LIQUID,FATTY ODOR.
Percent Volatiles by Volume:NIL

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS,COPPER ALLOY,CARBON STEEL,ELEMENTS 24 - 30.
Stability Condition to Avoid:CONTACT WITH METALS,CAUSE SLOW CORROSION &
DISCOLORATION.
Hazardous Decomposition Products:ACROLEIN.

Disposal

Waste Disposal Methods:MATERIAL COMPLETELY BIODEGRADABLE-CONSULT
LOCAL,STATE & FEDERAL REGULATIONS AS TO DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.